How to use the emergency Eyewash
The emergency Eyewash can be used to wash or shower the eyes and body of operators when their eyes or body are exposed to toxic, harmful and other corrosive chemicals, mainly to avoid further harm to human body caused by chemicals. However, these devices are only preliminary treatments for the eyes and body, and cannot replace medical treatment. In severe cases, further medical treatment must be carried out as soon as possible. When an unexpected injury accident occurs, the rapid spraying and flushing of this product can minimize the degree of injury.
At the same time, there are still many precautions when using the emergency Eyewash. The emergency eyewash is only used in emergency situations to temporarily delay the further damage of harmful substances to the eyes and body, which cannot replace medical treatment. Those with serious conditions after washing must be treated in the hospital as soon as possible; And it is necessary to do a good job in pipeline antifreeze during winter; Relevant articles shall not be covered to affect the normal use of the emergency Eyewash. The installation height of the Eyewash should be about 1.2m to 1.3m. The Eyewash should be installed near the dangerous goods storage place in each workshop (within 30m); When using the Eyewash, gently push the opening/closing valve to allow water to spray out automatically. After use, close the opening/closing valve; The Eyewash is used in emergency situations to temporarily alleviate the harm of harmful objects to the body for further treatment.
At the same time, there are still many precautions when using the emergency Eyewash. The emergency eyewash is only used in emergency situations to temporarily delay the further damage of harmful substances to the eyes and body, which cannot replace medical treatment. Those with serious conditions after washing must be treated in the hospital as soon as possible; And it is necessary to do a good job in pipeline antifreeze during winter; Relevant articles shall not be covered to affect the normal use of the emergency Eyewash. The installation height of the Eyewash should be about 1.2m to 1.3m. The Eyewash should be installed near the dangerous goods storage place in each workshop (within 30m); When using the Eyewash, gently push the opening/closing valve to allow water to spray out automatically. After use, close the opening/closing valve; The Eyewash is used in emergency situations to temporarily alleviate the harm of harmful objects to the body for further treatment.